Compare · SiteOps vs UptimeRobot

An UptimeRobot alternative for agencies that report to clients.

UptimeRobot is a generous, well-known uptime monitor. SiteOps is built for one situation: an agency looking after many client sites that has to explain each outage to the client. Here is how they compare, including where UptimeRobot is the better pick.

SiteOps overview: one website down and two degraded, counts of sites, monitors, journeys and active incidents, the recent monitors with status and response time, recent activity, and the critical incident on top.
The overview, showing the built-in sample workspace — a fictional agency on reserved .example domains.

The short answer

Which one fits you

Choose UptimeRobot if

  • You want the largest free tier: 50 monitors at 5-minute checks, and UptimeRobot's terms allow commercial use.
  • You need SMS or voice-call alerts, port, ping or UDP monitors, or checks every 30 or 15 seconds.
  • You want status pages on your own domain, available from its Solo plan.

Choose SiteOps if

  • You look after client sites and want SSL, DNS and broken links checked per site without setting up separate monitors.
  • You want each incident to arrive with evidence you can forward: what was measured, and what is only a guess.
  • You send clients a monthly report and want it written and emailed for you.
A website in the sample workspace marked Degraded: response time, availability, certificate days left and open incidents, then why it is not healthy, with observed facts beside possible causes marked not verified.
A website in the sample workspace: what is wrong, the facts that were measured, and possible causes marked as not verified.

Side by side

SiteOps and UptimeRobot, feature by feature

UptimeRobot's plans and features as published on its own site, read on 26 October 2026; prices in its currency. Check the pricing and terms pages before deciding; they change.

SiteOps compared with UptimeRobot; the last column says which is ahead on each row
TopicSiteOpsUptimeRobotAhead
PriceFree (5 sites); Studio €29/mo (30 sites); Agency €69/mo (100 sites). Priced per website, not per checkFree; Solo from $9/mo billed yearly; Team $35/mo ($30/mo yearly); Scale from $65/mo; Enterprise custom. Priced per monitor Even
Free plan5 websites, checks every 5 minutes, email alerts, no card50 monitors, 5-minute checks, 1 basic status page, up to 5 integrations; commercial use allowed by the terms UptimeRobot
Fastest interval1 minute on Studio and Agency; 5 minutes on Free60 s on Solo, 30 s on Team, 15 s on Scale UptimeRobot
Check typesHTTP and response time, SSL certificate, DNS, read-only API (GET/HEAD with status and body assertions), broken linksHTTP, keyword, ping, port, UDP, DNS, API, SSL and domain expiry UptimeRobot
Broken linksSame-site links on a page, checked on a scheduleNot offered SiteOps
Browser checksBrowser journeys (open, click, fill, assert, screenshot) on Agency, every 15 minutes at mostNot offered SiteOps
LocationsOne location (Germany); failures are re-checked from the Cloudflare edge before an incident opens. Not continuous multi-regionMultiple locations; location-specific monitoring UptimeRobot
AlertsEmail, Telegram, Slack and signed webhooks. No SMS or phone callsEmail, SMS, voice calls; webhook, Zapier and PagerDuty from Team; Slack, Telegram and Teams integrations UptimeRobot
Status pagesClient status pages on Studio and up; white-label on Agency. Hosted on siteops.foldnine.dev, no custom domain yet1 basic page on Free; own domain from Solo; white-label from Team UptimeRobot
Client reportsMonthly client report by email, per client, on the day you choose; white-label on AgencyNot offered as scheduled client reports on the pricing page SiteOps
Incident detailIncidents keep the evidence (status, headers, timings, certificate, DNS) and list facts apart from unverified causes; a read-only link you can send the clientRoot-cause details on every plan; comments and post-mortems on higher plans SiteOps

When something fails

An incident you can forward without rewriting.

  1. 01A check fails twice

    One bad result is noise. Two consecutive failures of the same check open an incident — threshold adjustable per check.

  2. 02Evidence is kept

    HTTP status, response headers, body excerpt, resolved and serving address, TLS certificate, and where the time went.

  3. 03Facts apart from guesses

    What was measured is listed as fact. Likely causes are labelled as unverified, each with what it rests on and how to confirm it.

  4. 04Recovery closes it

    The first passing result resolves the incident and records how long it lasted. Notes and acknowledgements stay on the timeline.

An incident page: severity and state, summary with first detected and last observed times, a strip of check results, observed facts beside unverified possible causes, and the evidence.
An incident in the sample workspace. Hypotheses are rule-based and marked as unverified.
Recorded in the built-in sample workspace: a fictional agency on reserved .example domains. No sound.

Said plainly

Where SiteOps is weaker than UptimeRobot

Better to read it here than find out after you have moved your client sites.

  • UptimeRobot's free plan covers ten times as many monitors as ours.
  • No SMS or voice-call alerts, no port, ping or UDP monitors, and nothing faster than one minute.
  • Checks run from one home location; other locations are used only to confirm a failure.
  • Status pages cannot be served on your own domain yet.
  • SiteOps is new and has no track record; UptimeRobot has run for over a decade.

For agencies

Every client, one place to look.

  1. 01 / 03

    Add every client at once

    Paste up to 50 addresses, or a CSV with client names. You see what will be added before anything is.

    Adding several websites: a pasted list of client names and addresses on the left, and on the right a preview table where each line is marked Will add before anything is added.
  2. 02 / 03

    A link you can send the client

    A read-only page for one incident: what was measured, when, and for how long. No internals, revocable at any time.

    The read-only incident page a client sees: the website, the incident title, its state and severity, a summary with first detected and last failing check times, and what was measured.
  3. 03 / 03

    Monthly report, sent for you

    Availability, response times, incidents and expiring certificates per client, emailed on the day you choose under your agency's name.

    The monthly reliability report for one client, with availability, failed checks, median and p95 response times and incidents, beside the email it arrives in.

Screens from the built-in sample workspace: a fictional agency on reserved .example domains.

Questions

Frequently asked

Is SiteOps cheaper than UptimeRobot?
Not on the free plan: UptimeRobot gives 50 monitors free, SiteOps gives 5 websites. For agencies the comparison depends on what you count. SiteOps charges per website, and each website gets HTTP, SSL, DNS and broken-link checks; UptimeRobot charges per monitor. Studio is €29 a month for 30 client sites with one-minute checks.
Can I move my sites from UptimeRobot?
Yes, by address. Export your monitor URLs from UptimeRobot and paste up to 50 at a time, or a CSV with client names, into SiteOps' bulk add. You see what will be added before anything is. Alert channels and status pages are set up again by hand.
Does SiteOps send SMS or phone-call alerts?
No. Alerts go by email, Telegram, Slack and signed webhook. If you need someone woken by a phone call, UptimeRobot or Better Stack does that and SiteOps does not.
What does SiteOps do that UptimeRobot does not?
It checks broken links, runs browser journeys on the Agency plan, sends a monthly report per client by email, and keeps the evidence of each incident with measured facts separated from possible causes, in a read-only link you can send the client.

Try it on five client sites, free. No card.